Having your very own fire pit in the yard can bring you a great amount of joy. Not only do fire pits look great, but they also serve many practical functions.
You can cook food on them, or roast some marshmallows on a chilly evening with your loved ones.
A fire pit is something right out of the movies that adds that extra sparkle to your suburban life. However knowing how to build outdoor fire pits can be a bit of a challenge if you’ve never done it on your own before.
Learning how to build an outdoor fire pit however is quiet easy and saves you a lot of cost on having someone else build it for you.
So grab your tools and get into your builder gear as we teach you how to build an outdoor fire pits on your own!
The Method for How to Build an Outdoor Fire Pits
To figure out how to build a fire you, first you have to start with identifying which spot in your yard is the best to build the fire pit on.
Once you’ve found that spot you have to get rid of all the grass and weeds in that spot by completely scraping it all off from the ground and expose the bare dirt.
The next part you have to do is to create a circle in that spot so that you can build around that circular shape.
The best way to create a good circle shape is to hammer in a stake in the middle of where your circle will be and make sure it is nicely jammed in there and secure.
After you’ve nicely secured the stake, you need to measure a piece of the string according to the length of the radius of the circle you want to draw.
For example, if you want to have a fire pit with a diameter of 2 feet, you need to cut the thread into half of that length that is 1 foot.
The next step is to tie this string to the stake you’ve nailed into the ground and tie the other end to a spray paint can.
Now all you need to do is to pick up the spray paint can, stretch it out to the full length of the string attached to it and spin it around the stake in a circular motion while spraying the paint on the ground.
Once you are done you’ll have your perfect template ready to start learning how to build an outdoor fire pit on.
More: Solo Stove Bonfire?
The steps to build the fire pit
Here are some steps you need to take to learn how to build an outdoor fire pits after you have your template shape ready:
- Get the Base of the Fire Pit Ready: For this step of learning how to build an outdoor fire pits, you will need to get some concrete blocks that are shaped like wedges to use as your bricks for the fire pit walls.
This part is more about attention and technique than any actual hard work.
All you have to do is simply take all these wedge blocks and start placing them around the circular line you have marked on your fire pit template on the ground.
You have to take some care in this step to make sure all of your blocks line up with each other properly so that they don’t look unsightly.
You have to do this for up two layers of blocks, one layer on the bottom and the other layer to top it off.
- Place the Fire Ring Inside the Base: The next step of learning how to build an outdoor fire pits, is to place a fire proof ring inside the circle to ensure the fire in the pit stays contained.
After placing it inside of the circle just hammer it into the ground so that it is not completely loose and has at least some level of grip on the ground.
After you’ve done that, you need to do something to bridge the gap between the concrete block circle and the inner fire ring so that it doesn’t look odd and also so that it has some support.
This is a very easy step as all you have to do is to grab some dirt with a shovel and simply keep pouring it in wherever you see the gap between the concrete blocks and the fire ring.
Stop pouring once the dirt is filled to the top.
- Gluing it All Together: This is the last step as far as making the actual fire pit in itself is concerned.
For this step you have to very carefully pick up all of the blocks you laid down to create the walls of the fire pit, and start placing some strong glue between all the pieces.
Many people skip this step, however it can be very helpful in keep your fire pit sturdy and making sure the stones don’t spontaneously fall over.
After gluing all the pieces together, take some crushed stones and put them in the dirt filler you put between the ring and the concrete blocks.
This ensures that the dirt inside won’t fly away from the wind and stay fixated in its place.
When you’re done with all of this, just line the center of your pit with gravel and you’re good to go.
- Making Log Benches: A fire pit is not complete without some nice classy looking log benches to go around it. These are incredibly easy to make if you just have the right equipment.
For the seat part of the benches you need to saw a log in half and smooth it over to create a flat surface.
To make the supporting legs of the benches use the logs and place the cut pieces on top of them.